{"id":2781,"date":"2022-03-18T02:03:00","date_gmt":"2022-03-17T23:03:00","guid":{"rendered":"https:\/\/woodiswood.com\/?p=2781"},"modified":"2022-09-07T12:00:18","modified_gmt":"2022-09-07T09:00:18","slug":"break-down-of-how-you-cut-small-pieces-on-a-scroll-saw","status":"publish","type":"post","link":"https:\/\/woodiswood.com\/break-down-of-how-you-cut-small-pieces-on-a-scroll-saw\/","title":{"rendered":"Break-down of How You Cut Small Pieces On a Scroll Saw"},"content":{"rendered":"\n
\"\"<\/figure>\n\n\n\n

A scroll saw is a handy tool when you have to cut a piece with a lot of curves on it. It allows you to move your piece while the saw does its work to achieve the desired cut. But it is not as easy as it seems otherwise anyone could design intricate pieces on their scroll saw. Not only does it require a lot of practice but you also need to have good control of your hands. So in this article, we will be giving you a breakdown of how you cut small pieces with a scroll saw.<\/p>\n\n\n\n

In order to cut small pieces on a scroll saw, you might want to draw out your pattern. If the pattern requires it, use a drill bit to make a hole for the blade to fit in. After that, gently push your hands and let the saw blade do the work. Lastly, if you want, you can use a masking sheet on your wooden piece to give it strength to avoid splinters and tears.<\/strong><\/p>\n\n\n\n

Scroll saw blades are very thin so they tend to break easily. The one mistake that most people make when using a scroll saw as a beginner is that they push the piece of wood too hard. If the tension on the blade is too high it might break the blade if pushed too hard against it. Instead, let the blade do the job while your job is to guide the wood piece gently. Use one hand as a loose pivot while you use the dominant hand to guide the blade on the pattern.<\/p>\n\n\n\n

Steps and the Right Technique to Cut Small Pieces on a Scroll Saw<\/strong><\/h2>\n\n\n\n

While it is all about practice, some steps you take will help you achieve the desired cut with ease. These are specifically useful to make cuts on a small piece of wood, where there isn’t a lot of space to move around.<\/p>\n\n\n\n

Step 1 – Drawing Out Your Pattern<\/strong><\/h3>\n\n\n\n

Whether you are cutting a straight line or one with a lot of curves, first you need to draw it out on the wood. You can stick a piece of printed paper on the piece of wood if that helps you out better. The lines you will use to draw out the pattern will be your guide on your scroll saw journey.<\/p>\n\n\n\n

Step 2 – Drill Holes (Optional if Pattern Requirement)<\/strong><\/h3>\n\n\n\n

If your pattern requires you to insert the scroll saw in the middle of the piece, then you should drill a hole in it. By using a drill press make holes where you need to insert the blade of the scroll saw and then cut from there. One way to avoid tearing from the back end of the piece is to use another piece to support it from underneath. This gives it strength and does not cause your wooden piece to get torn from underneath when drilling. <\/p>\n\n\n\n

Step 3 – Starting Your Cut<\/strong><\/h3>\n\n\n\n

You need to understand that you can’t rush this process, you need to be extremely careful and steer the piece of wood with great care and precision. As we said before, don’t force it, and let the blade do the job as you guide the piece with your hands. Use your non-dominant hand as a pivot for your dominant hand to help steer the piece. <\/p>\n\n\n\n

Step 4 – Finishing Your Cut<\/strong><\/h3>\n\n\n\n

When it is time to finish make sure you clean off the piece, as the shavings can hinder your scroll saw. After you are done you should turn the scroll saw off and then remove the piece.<\/p>\n\n\n\n

Bonus Scroll Saw Tips<\/strong><\/h2>\n\n\n\n