{"id":1722,"date":"2021-07-12T16:04:30","date_gmt":"2021-07-12T13:04:30","guid":{"rendered":"https:\/\/woodiswood.com\/?p=1722"},"modified":"2022-09-07T12:00:42","modified_gmt":"2022-09-07T09:00:42","slug":"3-easy-steps-to-seal-an-outdoor-wood-carving","status":"publish","type":"post","link":"https:\/\/woodiswood.com\/3-easy-steps-to-seal-an-outdoor-wood-carving\/","title":{"rendered":"3 Easy Steps to Seal an Outdoor Wood Carving"},"content":{"rendered":"\n
\"\"<\/figure>\n\n\n\n

Finishing wood usually depends on how and where it will be used. For outdoor purposes, you usually have to seal the wood properly. Because if you don’t, it can’t survive rain and other harsh elements outdoors. If you have just worked on a carving for this purpose and need help sealing, we have you covered. In this guide, we will tell you the 3 easy steps to seal an outdoor wood carving.<\/p>\n\n\n\n

To seal an outdoor wood carving you have to follow 3 simple steps: Choose the sealer that prevents the carving from moisture and heat, then sand the wood to prepare the carving for the sealer, and finally apply multiple layers of the sealer with a paintbrush of your choice.<\/strong><\/p>\n\n\n\n

As simple as these steps may sound, there\u2019s more to it than that. Just a heads up before we start — although these steps are going to make your outdoor carvings safe, know that sealers wear off.<\/strong> After a few years, you might have to reapply another coat on your wooden carving for protection. This will help in prolonging the life of the wood further.<\/p>\n\n\n\n

Now with that out of the way, let us go through the 3 steps for sealing an outdoor wooden carving.<\/p>\n\n\n\n

What is a Sealer?<\/h2>\n\n\n\n

Don’t be confused by the term sealer, instead, look at its meaning. A sealer is basically a coat that is going to seal the wood inside it. It is used to protect the wood from moisture and other elements. Sealers include things like drying oil, shellac, polyurethane, and paint. Stains are also included in wood sealers, but they darken the color of the grain.<\/p>\n\n\n\n

The way sealers work is that sealers are absorbed in the grain of the wood and when they harden, they create a protective coat outside. This coat prevents the wooden surface from absorbing any moisture. Thus protecting it from mildew, rot, and cracking.<\/p>\n\n\n\n

Usually, there are water-based sealers and oil-based sealers available in the market. The water-based ones dry off very quickly and are usually non-toxic, but not always. Most people use water-based sealers for their woodwork, they are easy to use, relatively affordable, and generally more popular.<\/p>\n\n\n\n

Woodworkers who really want to bring out the best in their projects, apply oil-based sealers.<\/strong> These dry slowly, but the color of the wood deepens and the grain structure is more prominent when you use these.<\/p>\n\n\n\n

Steps to Sealing an Outdoor Wooden Carving<\/h2>\n\n\n\n

When you seal a wooden carving, it is protected from water, sun degradation, and oxidation. It is also protected from molds, fungus, and rot, that eat at the wood from inside out. So here are some steps you can follow to seal an outdoor wooden carving: <\/p>\n\n\n\n

Step 1: Choosing the Correct Sealer<\/h3>\n\n\n\n

Choosing the right sealer is a big deal, with so many in the market, you might not know which one to choose. The one thing you need to focus on is whether the sealer will protect the wood carving from the harsh outdoors. In this regard, some products on the market protect your wood from moisture. But the outdoors has much more in store than just a little water.<\/p>\n\n\n\n

Sun degradation is a huge part of why paints peel off in the outdoors. So a normal indoor sealer will not work very well against that since it is not meant to face the harmful UV rays that are in the sunlight. Some products have UV blockers or inhibitors that prevent sun degradation. Lastly, you want something that is eco-friendly and non-toxic.<\/p>\n\n\n\n

One great choice for an outdoor sealer is the Minwax brand Helmsman Spar Urethane<\/a>. It works great against the outdoor elements, specifically sun degradation.<\/p>\n\n\n\n

Step 2: Preparing to Apply a Sealer<\/h3>\n\n\n\n

Before you start to apply the sealer on your wood, you might want to prepare it for the process. Some sealers require you to sand it first, wash the wood with soap, clean it, dry it properly and dust it off. Only then apply the sealer.<\/p>\n\n\n\n

Usually, the instructions are mentioned on the manufacturer’s site or on the product itself, and most of the time you have to sand your wood in advance. If it is an oil-based sealer, you would not like your wood to be sanded finely. That is because then the pores are clogged and the oil does not get absorbed.<\/p>\n\n\n\n

For water-based sealers, since water is less thick it can penetrate the wood better. It also dries off way faster than oil-based sealers, so there is that benefit too.<\/p>\n\n\n\n

Also if you are applying the sealer outdoors, make sure there is no sign of rain. This is because it takes time for the sealer to cure and usually requires 2-3 coats before you are done. Since some sealers can be toxic and release fumes when used, you would usually stain your piece outdoors. In that case, check the forecast ahead and ensure there is no rain in the coming days.<\/p>\n\n\n\n

If you can’t sand your piece because there are too many fine details on it, just clean it as well as you can. Though usually, you need to sand the wood before applying a sealer to remove marks. Not sanding the wood is not a large issue, however, just a recommendation and a “perfect practice”, as long as you make sure the piece is clean and there are no pieces of wood or dust on it.<\/p>\n\n\n\n

Step 3: Applying the Sealer<\/h3>\n\n\n\n

To apply the sealer, you need to use a paintbrush of your choice. Usually, it has to be a big enough paintbrush that can cover enough surfaces. But make sure the brush isn’t too big either, so that it does not apply sealer inside the crevices of the carving.<\/p>\n\n\n\n

Simply apply a thin coat of your sealer on the piece of wood that you have previously sanded and cleaned off thoroughly. If you have not sanded it, just ensure the piece is clean and apply a thin layer on it. Once you are done completely coating the wooden carving, let the carving dry in an open space.<\/p>\n\n\n\n

Once it is dry, you want to sand the surface with fine sandpaper. The reason behind it is that the sealer gets absorbed by the pores of the wood and the grain thickens up. It gets raised and sticks out of the surface, so you need to sand the grain<\/a> down a bit.<\/p>\n\n\n\n

Once you are done sanding over the first coat to even the surface, time to apply the second one. Evenly apply another thin layer of your sealer on the wooden carving. Once complete, it is not crucial to sand the coat again since anything over one layer is sufficient for the wood, but it is generally recommended to seal the carving a third time for more protection and a better look too. <\/p>\n\n\n\n

After 3-4 coats, you are going to have enough protection for the wood to last at least a year, this will depend on much the sealer gets damaged over time. Moisture is not going to damage your wood as much as the sun will. So try to keep the wood out of direct sunlight if possible. Even with UV inhibitors in your sealer, chances are it will wear off in a year or two. You will need to reapply the coats again to preserve your carving<\/a>.<\/p>\n\n\n\n

Be sure to take a look at this short 3-minute video for a more visual approach to how you can apply sealer to your carving. You can skip the first minute to get right to the demonstration!<\/p>\n\n\n\n

\n
https:\/\/www.youtube.com\/watch?v=MAmye6pDRnc&ab_channel=MitchellDillman<\/a>